![]() ![]() ![]() The results of fractography investigations, performed by means of electron backscatter diffraction analysis, indicated that grain boundaries were precipitation-free and the cracks were formed in the areas with a high Taylor factor value. However, at 760 ☌, it was observed that the plastic deformation of the as-built sample was influenced by an intergranular brittle fracture, leading to the elevated temperature ductility loss. The as-built sample had an acceptable tensile behavior at the ambient temperature, as compared to the AMS 5536 N standard specification. Microstructural characterizations showed that the columnar grains of the austenite phase consisted of a submicron cellular microstructure with a weak texture along direction. The microstructure and tensile behavior of samples were evaluated. The LPBF process parameters in terms of volumetric energy density were optimized to obtain the maximum relative densities, as well as the lowest defect size. The microstructure-tensile response correlation in a crack-free laser powder-bed fusion (LPBF) Hastelloy X Ni-based superalloy is investigated. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |